Wellsaw 1316S Bedienungsanleitung PDF herunterladen (Seite 12)

Maintenance

Caution: Disconnect the electrical supply and press

emergency STOP button before performing any

maintenance. DO NOT service the Frame Hydraulic

Cylinder or Down Feed Valve unless the frame is in

the DOWN position or resting on a mechanical stop,

such as a block of wood.

Daily

1. Keep the saw clean and free of chips.

2. Maintain the coolant level and keep the

coolant tank and filter clean of chip accumulation

or sludge.

Monthly

1. Check, adjust and replace blade brush as

needed.

2. Lubricate drive gears

3. Inspect carbide guides and bearings.

4. Inspect drive belt.

5. Clean coolant tank and filter as needed.

Annually

1. Check hydraulic oil level.

2. Replace guide rollers and carbide inserts.

3. Inspect gear box. Lubricate as needed.

Lubrication

Correct and adequate lubrication is a very

important factor in determining the life and service

of your Wellsaw. It is essential that all dust, dirt,

chips, etc. be

thoroughly removed before lubricating the saw.

The following lubrication recommendations cover

usual saw applications. Heavy use and hostile

environments may indicate more frequent

lubrication for best saw performance.

Vise Screw, Ring Gear, Drive Pinion

1. Inspect Monthly.

2. Use Anti-Seize on Vise Screw.

3. Use Extreme-Pressure Open Gear Lube

sparingly on Ring Gear and Drive Pinion

Gear Case

1. Inspect after 3 years (6,000 hours).

2. Use Mobilgrease XHP 220 or equivalent.

3. Viscosity: Heavy Grease, drop point 550EF

4. Military Specification: None

Hydraulic Cylinder

1. Inspect annually. Fill to top of plug. Drain and

replace every 5 years (10,000 hours).

2. Fill with Mobil Velocite Oil #6 or equivalent.

3. Viscosity at 100EF: SUS 57-61.

4. Military Specification: None.

Motor

1. Inspect annually. Re-lubricate every 2 years

(4,000 hours) 1 to 2 full strokes.

2. Use Shell Dolium R or equivalent.

3. Viscosity: Heavy Grease, drop point 219EC.

4. Military Specification: None.

Parts Ordering

For your convenience:

When contacting your Wellsaw supplier or the Company for parts or service, it is essential that you

have your saw Model, Serial Number and Purchase Date available.

Jot them down here for handy reference.

Model:

Serial Number:

Purchase Date:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Wellsaw 1316S Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Wellsaw 1316S